Taconic PCB Materials Product Selection Guides

For a comprehensive selection of RF Laminates and Prepregs, click below:

ceramic Filled PTFE Laminates offer enhanced thermal and electrical stability.

Part Name DK + Tolerance Loss Factor Data Sheet Safety Data Sheet Download Processing Information Comments
EZ-IO-F 2.8, 2.77 +/- 0.05 0.0015, 0.0014 Download - - Thermally stable composite based on nanotechnology, spread weave and PTFE
EZ-IO 2.8 +/- 0.05 0.0012 Download Download Download Thermally stable composite based on nanotechnology and PTFE
TSM-DS3M 2.94 +/- 0.05 0.0011 Download Download Download Dimensionally stable low loss laminate, rivals epoxy
RF-301 2.97 +/- 0.07 0.0012 Download Download Download High volume antenna material
RF-30A 2.97 +/- 0.07 0.0013 Download Download  Download High volume antenna material
TSM-DS3b 3.0 +/- 0.04 0.0011 Download Download  Download Dimensionally stable low loss laminate, rivals epoxy
NF-30 3.00 +/- 0.04 0.0013 Download Download Download ceramic-filled PTFE composites 
without a woven fiberglass reinforcement
TSM-DS3 3.0 +/- 0.05 0.0011 Download Download Download Dimensionally stable low loss laminate, rivals epoxy
RF-30 3.0 +/- 0.1 0.0014 Download Download  Download High volume antenna material
TLF-35A 3.5 +/- 0.05 0.002 Download Download Download Low cost base material
RF-35HTC 3.5 +/- 0.05 0.0007 Download - - High thermal conductivity laminate
RF-35TC-A 3.5 +/- 0.05 0.0017 Download - - Thermally conductive low loss laminate
RF-35TC 3.5 +/- 0.05 0.0011 Download  Download  Download High thermal conductivity base material
RF-35A2 3.5 +/- 0.05 0.0018 Download  Download  Download Low loss power amplifier material
RF-35 3.5 +/- 0.1 0.0018 Download  Download  Download High volume microwave & RF laminate
RF-41, RF-43, RF-45 4.1, 4.3, 4.5 
+/-
0.15
0.0038
0.0033
0.0037
Download

RF-41RF-43

RF-45

 

Download RF laminate with FR4 DK values
TRF-43 4.3 +/- 0.15 0.0035 Download Download  Download Low cost RF laminate with FR4 DK values
RF-60TC 6.15 +/- 0.15 0.0020 Download Download Download High DK, high thermal conductivity material
RF-60A 6.15 +/- 0.25 0.0028 Download Download Download Low moisture absorption, stable Dk over frequency
CER-10 10.00 +/- 0.50 0.0035 Download Download Download organic-ceramic laminate based on woven glass reinforcement
RF-10 10.2 +/- 0.30 0.0025 Download Download  Download  Low Loss, High DK material

 

Woven Glass Reinforced PTFE Laminates contain fiberglass as a mechanical reinforcement for increased dimensional stability.

Part Name DK + Tolerance Loss Factor Data Sheet Safety Data Sheet Download Processing Information Comments
TLY 2.17- 2.20
+/- 0.02
0.0009 Download Download Download Military grade very low DK base material
TLY-5Z 2.20 +/- 0.04 0.0015 Download - Low Dk, low Z axis laminate
TLP 2.2, 2.33
+/- 0.03
0.0009 Download Download Download Low cost volume material
TLX 2.45-2.65 
+/- 0.04
0.0015-0.0021 Download  Download Download Low DK base material
TLT 2.45-2.65 
+/- 0.04
- Download Download Download Low DK base material
TLA 2.62 0.0012 Download  Download Download Low cost antenna laminate
TLC

2.75
3.0
3.2

0.0022
0.0028
0.0030
Download Download Download Low cost RF laminate
TLE 2.95 0.0026 Download  - Download Thin dielectric base material for couplers

 

Bond Plies / Prepregs are thermoplastic and thermoset bonding layers used in multilayer PWB constructions that may be non-reinforced or contain very low fiberglass content.

Part Name DK + Tolerance Loss Factor  Data Sheet  Safety Data Sheet Download Processing Information Comments
FEP 2.0 0.0003 Download Download Thermoplastic bonding film
TacBond 1.5 2.35 0.0025 Download Download Thermoplastic bonding film
fastRise™ 25,26, 27, 28
(FR-27-0045-35)
2.72 +/- 0.04 0.0014 Download  Download Download Lowest loss non-reinforced prepreg
Pre:Rogers PCB Materials Product Selection Guides     Next:消费电子领域最火热的生物传感器
Online Service 
Lisa
Yana
Support
Sales
Sales
Welcome to JXTPCB